The term fault is used in animal breed standards A breed standard in animal fancy and animal husbandry is a set of guidelines which is used to ensure that the animals produced by a breeder or breeding facility conform to the specifics of the breed to describe an aspect of appearance or temperament that is considered detrimental to the breed type Breed type is the whole of the characteristics that are typical of a breed of domesticated animals. Breed type may include details of form or color that are not directly related to the economic value of the animal, and are usually defined in breed standards of the animal's breed. In dogs The dog is a domesticated form of the gray wolf, a member of the Canidae family of the order Carnivora. The term is used for both feral and pet varieties. The domestic dog has been one of the most widely kept working and companion animals in human history, faults have to do with the externally observable qualities of the dog such as appearance, movement, and temperament. Qualities separately tested such as tests for ability in specific work or sports, tests for genetic health, tests for general health or specific inherited disease, or any other specific tests for characteristics that cannot be directly observed are not described with the term fault. Minor faults may or may not have anything to do with the individual dog's ability to work or suitability as a pet A pet is an animal kept for companionship and enjoyment or a household animal, as opposed to wild animals or to livestock, laboratory animals, working animals or sport animals, which are kept for economic or productive reasons. The most popular pets are noted for their loyal or playful characteristics, for their attractive appearance, or for their.

Contents

Defining specific faults

Faults are formally defined in reference to the breed standard A breed standard in the dog fancy is a set of guidelines covering specific externally observable qualities such as appearance, movement, and temperament for that dog breed. Breed standards are not scientific documents, but are written for each breed by clubs of hobbyists called breed clubs for their own specific requirements. Details and of the specific dog breed Dog breeds are groups of closely related and visibly similar domestic dogs, which are all of the subspecies Canis lupus familiaris, having characteristic traits that are selected and maintained by humans, bred from a known foundation stock, and, due to the extreme variability of the dog ("Phenotypic variation among dog breeds, whether it be in size, shape, or behavior, is greater than for any other animal"[1]), a single set of faults cannot be generically described for all dog breeds. Wikipedia articles for individual breeds should describe what are considered faults in that particular breed.

Purpose and use

Faults are evaluated as part of the judging process in conformation shows Conformation shows, also referred to as breed shows, are a kind of dog show in which a judge familiar with a specific dog breed evaluates individual purebred dogs for how well the dogs conform to the established breed type for their breed, as described in a breed's individual breed standard. As the breed standard has only to do with the externally. As the purpose of conformation shows is to assist breeders in the selection of breeding stock by rewarding with championships Championships are awarded to dogs who have passed through a process of selection at dog shows. Traditionally, a championship was received at a conformation show, but championships are now offered for dogs who have attained a high degree of perfection in other dog sports as well the dogs which, through external observation only, are the best representatives of the breed, major faults or an excess of minor faults would prevent a dog from completing a championship and being bred. Faults may or may not interfere with the individual dog's working ability, or its qualities as a pet. Current advances in genetic testing Genetic Testing : Gene tests , the newest and most sophisticated of the techniques used to test for genetic disorders, involve direct examination of the DNA molecule itself. Other genetic tests include biochemical tests for such gene products as enzymes and other proteins and for microscopic examination of stained or fluorescent chromosomes are also used by responsible breeders in selecting breeding stock, in addition to visual evaluations by a judge A dog-Breed-show judge is a person that is qualified to evaluate dogs at a conformation show. At small shows, there might be only one judge for all breeds and classes. At larger shows, there might be several judges, with each responsible for only certain breeds or classes in the conformation ring, although genetic testing and other tests are outside the scope of the written breed standard.

Major and minor faults

Faults may be either major faults (preventing the dog from being shown in the conformation ring or being bred by responsible breeders) or minor faults, such as coat texture, that can easily be corrected by careful breeding of the next generation. A major fault would be a breed type Breed type is the whole of the characteristics that are typical of a breed of domesticated animals. Breed type may include details of form or color that are not directly related to the economic value of the animal, and are usually defined in breed standards fault "which diminishes the overall look of the breed."[2] Another major fault would be visible structural problems of the dog that prevent the animal from doing the type of work for which it was bred. Dogs that run with great speed use the flexibility of their back; a back that is too arched or too flat will restrict the dog's speed, and would be seen as a fault.[3] Other major faults may involve temperament; "Aggressive behaviour is a serious temperament fault in a Lab The Labrador Retriever is one of several kinds of retriever, a type of gun dog. A breed characteristic is webbed paws for swimming, useful for the breed's original purpose of retrieving fishing nets. This and their subsequent use as hunting companions, gave them the name retriever. The dogs of this breed are very loving, kind and compassionate to."[4]

Whose fault is it? Interpretation of the standards

Since dogs have enormous variation in their appearance, what is or is not considered desirable or undesirable depends on the individual breed's appearance and historical background (what kind of work it was bred to do). Individual breed clubs, whose members write the breed standard A breed standard in the dog fancy is a set of guidelines covering specific externally observable qualities such as appearance, movement, and temperament for that dog breed. Breed standards are not scientific documents, but are written for each breed by clubs of hobbyists called breed clubs for their own specific requirements. Details and for their breed, decide which aspects of appearance and temperament that breeders should work towards eliminating in the breed. Those undesirable aspects of appearance and temperament are called faults. What constitutes a fault may differ from breed to breed. For example, an aloof and somewhat aggressive temperament might be suitable for a livestock guardian dog, but would be a completely unacceptable fault in a lap dog A lapdog is a dog that is small enough to be held in the arms or lie comfortably on a person's lap. Lapdogs are not a specific breed, but is a generic term for a type of dog of small size and friendly disposition.[5] Faults may be serious enough to require disqualification in a conformation show, eliminating the dog from winning a championship Championships are awarded to dogs who have passed through a process of selection at dog shows. Traditionally, a championship was received at a conformation show, but championships are now offered for dogs who have attained a high degree of perfection in other dog sports as well in conformation, or they may be minor, to be measured by the judge against the dog's good qualities.

Some breed standards are punctilious in the extreme, spelling out exactly what constitutes a fault in every part of the animal, and the degree to which each fault must be penalized. Some are more loosely written, leaving more open to interpretation by the judge, or not describing an attribute at all, which leaves the matter up to the individual judge’s opinion. Some breed standards states that a particular fault is to be penalized to the degree of the severity of the fault, leaving the exact determination up to the judge. Definitions which are open to human interpretation cause much ill-will at conformation shows when exhibitors disagree with the decision of the judge, despite the fact that the fanciers hire the judges and pay entry fees for the judge's opinion of their breeding stock.

For example, most breed standards list a ‘scissor bite’ as the correct one. A level bite, an under-bite or an overbite may be considered faults, depending on the breed standard description. In a conformation show, the judge must decide the degree of severity of the faulty bite, and therefore how much the dog must be marked down in relation to other dogs. However, some breed standards describe only a level bite as acceptable; other breed standards accept the scissor bite. The all-breed judge must know which bite is or is not a fault for each breed that he or she judges.

A given coat colour A dog coat may be a double coat, made up of a soft undercoat and a coarse topcoat, or a single coat, without an undercoat. The terms fur and hair are often used interchangeably when describing dog coats, but in general, a double coat, such as that of the Newfoundland, is called a fur coat, while a single coat, such as the poodle's coat, may be may be acceptable, it may be preferred, it may be the only acceptable colour, or it may be a fault. Sometimes these colours change over time, often after much in-fighting and bitterness. For many years, the only acceptable coat pattern in a Dalmatian The Dalmatian is a breed of dog whose roots are traced to Dalmatia, a region of Croatia. It is noted for its white coat with either black or liver spots was white with black spots, very recently liver spots have been accepted as a variant, but black still appears to be the preference of most. A black German Shepherd Dog The German Shepherd Dog , (German: Deutscher Schäferhund) is a breed of large-sized dog that originated in Germany. The German Shepherd is a relatively new breed of dog, with its origin dating to 1899. As part of the Herding group, the German Shepherd is a working dog developed originally for herding sheep. Because of its strength, intelligence is penalized; a white GSD is disqualified, as the color is believed to be linked to deafness and other serious health problems. Many GSD fanciers like the white colour and continue to breed for the white coat; some lobby for its acceptance into the breed standard, others argue for the creation of a new breed. In the future, genetic testing may show which of these variants in color are actually linked to health problems and which are not, which may lead to modification of the breed standards.

Working dogs

The breed standards for working dogs A working dog refers to a canine working animal, i.e. a type of dog that is not merely a pet but learns and performs tasks to assist and/or entertain its human companions, or a breed of such origin. In Australia and New Zealand a working dog is one which has been trained to work livestock, irrespective of its breeding usually specify that scars, broken teeth or other damage that evidence injuries sustained during a working career (often termed ‘honourable scars and injuries') are not to be penalized in conformation showing Conformation shows, also referred to as breed shows, are a kind of dog show in which a judge familiar with a specific dog breed evaluates individual purebred dogs for how well the dogs conform to the established breed type for their breed, as described in a breed's individual breed standard. As the breed standard has only to do with the externally. The Australian Cattle Dog The Australian Cattle Dog is a breed of herding dog originally developed in Australia for droving cattle over long distances across rough terrain. Today it is a versatile breed: a courageous and tireless worker, an intelligent and athletic companion and a loving and playful family pet. They can bite "if harshly treated", they tend to nip is an example of this as are some terriers A terrier is a dog of any one of many breeds or landraces of terrier type, which are typically small, wiry, very active and fearless dogs. Terrier breeds vary greatly in size from just a couple of pounds to weighing over 70 pounds and are usually categorized by size or function. There are five different groups with each group having several, where the breed standards specifically state that scars are not to be penalized as faults in conformation.

Details of breed standards and precise definition of faults are decided upon by breed clubs and are often hotly debated. Sometimes even minute details are argued over by fanciers and breeders to a degree that would astound the average pet owner who never plans on breeding his or her pet. Fanciers note that such irrelevant seeming qualities have the capacity to change the breed over time.

Often it is the breeders of working dogs who are the most vehement, pointing out that changes in fashion and fancy have led to what they see as a loss in working dog qualities of many breed that have show lines, through rewarding of external appearance without requirements for work. In some breed clubs, such as the Jack Russell Terrier Club of America, working ability and health are valued over conformation to the breed standard. However, even in the JRTCA breed standard only externally observed aspects of the dog are described, as working tests and genetic tests are beyond the scope of a breed standard, which exists as a description of the dog, not its DNA.[6]

See also

References

  1. ^ Scientists fetch useful information from dog genome publications, Cold Spring Harbor Laboratory, December 7, 2005; published online in Bio-Medicine
  2. ^ Definition of a Show Dog, by Steve Wolfson, published online by the American Rottweiler Club, accessed 3 October 2008
  3. ^ K-9 Structure and Terminology, by Edward M. Gilbert, Jr. and Thelma R. Brown, Chapter 2, Dog Gaits; Howell Books, 1995 ISBN 0876054211
  4. ^ Labrador Retrievers by Edith Bryan, Calgary Purebred Labrador Retriever Rescue, accessed 3 October 2008
  5. ^ As an example, the Maltese standard requires the dog to be "Sweet-tempered."
  6. ^ Jack Russell Terrier breed standard

Categories: Dog shows and showing | Dog breeding

 

The above information uses material from Wikipedia and is licensed under the GNU Free Documentation License The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a.
Some facts may not have been fully verified for accuracy. [Disclaimers Wikipedia is an online open-content collaborative encyclopedia, that is, a voluntary association of individuals and groups working to develop a common resource of human knowledge. The structure of the project allows anyone with an Internet connection to alter its content. Please be advised that nothing found here has necessarily been reviewed by]
This page was last archived by our server on Sat Dec 5 19:35:16 2009. [ refresh local cache ]
Displaying this page or its contents does not use any Wikimedia Foundation's resources.
The owners of this site proudly support the Wikimedia Foundation.

[Hide]▼
[Hide]▲